One application lasts up to 3 years · on-site service in Klang Valley
TÜV Rheinland certified
20 years in over 50 countries
IKEA Madrid exterior glass
Lead chemist: 40+ years in nanotechnology
What glass is up against
Nothing on your glass is just dirt.
Soap scum and body oils
Every shower leaves a film. On untreated glass it dries on, builds up, and turns the screen cloudy — and the harder you scrub it, the more you dull the surface.
Malaysian tap water leaves minerals behind every time it dries on the glass. Those white spots are not dirt sitting on the surface; they are minerals bonding to it.
Left alone, all three do the same thing in the end: they corrode and etch INTO the glass. At that point no cleaning product will help — the glass has to be professionally restored, or replaced.
A clear coating that water and oil will not stick to.
Two steps, eight hours
The coating is a clear liquid, sprayed onto a clean dry surface and wiped evenly in — two steps, and eight hours before the glass is used again. What it leaves behind is invisible: a sealed surface that water and oil will not stick to, so the things that normally bond to glass simply run off it instead.
Clean and dry the surface
Spray the coating and wipe it evenly
Wait 8 hours before use
What you get
Three things it does for the glass.
Benefit 01 · Protection
The coating helps water bead and makes deposits easier to clean. Regular care is still needed.
Answers: limescale and hard water · salt and chlorine · and then it is permanent
Benefit 02 · Easy to clean
Water and grime bead straight off instead of drying on. In ORE's experience, cleaning a shower screen drops from about 20 minutes to about 3 — with no harsh detergents.
Answers: soap scum and body oils
Benefit 03 · Long lasting
One application lasts up to 3 years. Unlike cheaper products, there is no monthly reapplication to remember and nothing to keep buying.
Surfaces
It is not only for shower screens.
Knowing what it will not go on saves everybody a wasted visit.
Works onGlass — shower doors, windows, balustrades, mirrorsTiles and groutStainless steel (304 / 316)Ceramic and porcelainAluminium, chrome and some metal tapware — assessed on siteCar glass — exterior only
Not suitable forNatural stone — marble, granite, sandstone, travertineTiles or grout that are already sealed — the old sealer must come off firstConcrete and brickAcrylic and plasticsColour-coated steel roofing and powder-coated surfacesUnsealed raw brass or copperIf you are not sure what your surface is, send us a photo before booking anything.
Why a coating
Why coat the glass, and not just clean it harder.
Hard water does not sit on glass. It bonds to the silica and eats into the surface — and once it has, no amount of scrubbing brings it back.
Scrubbing makes it worse
That white haze is etching, not dirt: the surface of the glass has been eaten into. Polishing etched glass removes more surface still, and the distortion gets worse with every round.
A coating protects clean glass
It does not remove damage that is already there. So we inspect first, and we test-restore a small area before we quote the whole screen. EnduroShield's manufacturer states the coating cuts cleaning time by up to 90%, with durability based on ten years of simulated normal use, certified by TÜV Rheinland, Germany.
Not a supermarket spray
Consumer water repellents are honest about their own lifespan — the makers suggest topping up every two to three weeks. This is applied once, and ORE Malaysia warrants its water repellency for 3 years. That warranty is on the coating, not on the glass, the hardware, or damage that was already there.
Compared with a supermarket water repellent
OREa supermarket water repellent
How long
OREApplied once, professionally, warranted 3 years by ORE.
a supermarket water repellentThe makers suggest re-applying every two to three weeks.
Where it works
OREBonded to clean glass, after inspection and restoration.
a supermarket water repellentSprayed over whatever is already on the glass.
DIY
OREWe apply on site in the Klang Valley; elsewhere we sell the DIY kit.
a supermarket water repellentAnyone can do it. On a tight budget it is a fair start.
Compared with replacing the glass
OREreplacing the glass
Light etching
ORERestore and coat. The glass restoration trade reports savings of roughly 30–70% against replacement.
replacing the glassIt works, but you are paying for glass you did not need to buy.
Deep etching
OREWe test a patch. If it does not come back, we tell you to replace.
replacing the glassThen this is the right answer, and we will say so.
Cracked or chipped glass
OREA coating protects a surface; it does not repair a crack.
replacing the glassReplace it.
Disruption
OREOn site, no hardware removed.
replacing the glassMeasure, make, remove, refit.
When a coating is the wrong answer.
The etching has gone deep. We test-restore a small area first — if it does not come back, we will tell you to replace the glass rather than coat over it.
The glass is cracked, the edges are chipped, or the hardware is loose. Fix or replace that first; our warranty covers the coating's water repellency and nothing else.
New glass, soft water, and you already squeegee every day. You may not need us at all.
You want it done today for almost nothing — a supermarket spray is cheaper, as long as you know you will be redoing it every few weeks.
A large commercial building already on a cleaning contract. A coating reduces cleaning; it does not replace the cleaner.
You are outside the Klang Valley. On-site application is Klang Valley only — elsewhere we can supply the DIY kit.
Two ways to have it
Do it yourself, or have us do it.
The same coating either way. The difference is who prepares the surface.
The DIY kit
Kits for shower glass, for kitchen tiles and grout, and a rain-repellent for car windscreens. Everything needed is in the box, with step-by-step video guides. Best on glass already in good condition.
ORE's certified applicators prepare the surface and apply the coating. The route for glass already marked, large areas, and anything above head height. It starts with an inspection.
On-site service covers Klang Valley — Kuala Lumpur, Putrajaya and Selangor. It sends a crew with equipment, so it does not travel as far as our glass delivery does.
It cannot remove marks that have already etched into the glass.
If your glass is already stained
EnduroShield stops new staining from getting into the glass — it cannot remove marks that have already etched in. If your screen is past that point, coating it will lock in how it looks today.
There are three honest options for glass that is already damaged:
Professional polishing and restoration
Replacing the glass
A pre-treatment before the coating goes on
Which one applies depends on how deep the damage is, and that is exactly what the inspection is for.
“Worth the investment for long-lasting glass protection. Feel expensive at first sight, but is worth it when it really delivers value.”
Jacky T.Facebook recommendation
“Reduces water spots on my glass surfaces. Still requires cleaning but lesser now.”
Azarita A. B.Facebook recommendation
More reviews (5)
“they did a very good job cleaning the shower stall glass and the coating makes it non stick and easy to clean”
Evan E. R.Shower glass · Facebook recommendation
“easy application, and it works as described”
Max T.DIY kit · Facebook recommendation
“I've tried other glass cleaners, but nothing beats Enduroshield. Some only last for few weeks but this last for months already. … Now my shower glass stay spotless. Great value for money.”
Jordan C.Shower glass · Facebook recommendation
“The coating was very useful and good. It protects the shower screens or mirror from becoming blurry, frosty and dated over a period of time. Highly recommended and value for money”
Alvin Y.Shower screen · Facebook recommendation
“Product is quite good, and provides on door service for glass cleaning. Thanks”
Tun Y. S.On-site service · Facebook recommendation
Explore the EnduroShield DIY kits in the shop and confirm the right pack for your surface. See the coating kits
Three years for every application ORE does — the DIY kit, on-site coating of existing glass and professional coating of new glass. It covers the coating's water repellency, not the glass. Customers who bought factory-coated new glass under the earlier 10-year terms are still served under those terms.
What is not covered?
Scratches, broken glass, hardware, labour to refit, using banned cleaners (bleach, strong acids or alkalis, abrasive paste, water-mark powder, scouring pads, steel wool), not following the cleaning instructions, and a new owner after the property changes hands.
What surfaces can be coated?
Glass, tile grout, stainless steel and chrome are the formal product lines; aluminium can be coated and tapware is assessed on site. Marble, granite and natural stone are not suitable, and tiles or grout with an existing sealer need it removed first.
Can you coat stainless steel near the sea?
Yes, ORE does on-site stainless steel. Near the sea it still needs care — rinse with fresh water regularly and dry with a microfibre cloth. The coating slows it down, it does not remove the maintenance.
How do I maintain it?
A soft cloth with a neutral cleaner; diluted white vinegar and water is fine. No strong scouring powder, bleach or abrasives. Shower glass and tiles are best cleaned weekly.
Where is the on-site service available?
Selangor, Kuala Lumpur, Putrajaya (Klang Valley).
What do I need to prepare?
Clear the shower area and dry it. The installer masks anything nearby that could be affected. A typical shower screen of about 28 square feet takes 2–3 hours; longer if polishing restoration is needed.
How do I apply it myself?
1) Clean the surface with the pre-cleaner. 2) Dry it fully with a microfibre cloth. 3) Spray the coating and wipe evenly with the application cloth. 4) Wait 8 hours before use. ORE has video guides and can send you the link.
Can it be used on marble or natural stone?
No. It isn't suitable for natural stone (marble, sandstone, travertine), concrete, brick, acrylic/plastics, Colorbond, powder-coated surfaces, or unsealed raw brass/copper.
Does it clean the glass automatically?
No. It helps water bead and makes cleaning easier, but regular cleaning is still needed. The manufacturer records up to 90% less cleaning; results depend on the surface and care.
Does manufacturer testing extend ORE’s warranty?
ORE’s current cover is 3 years. Customers with earlier factory-coated-glass agreements retain their original terms.
Can I request product documents?
Ask ORE for the appropriate certification or safety data sheet.
How do I start an enquiry?
Send ORE a photo, the location, the kind of surface, approximate area and whether it already has stains. New glass can be assessed for coating; existing stained glass is assessed for restoration first. Staff confirm the inspection and scope before the job is arranged.
