Glass restoration
Hard-water stains and soap scum polished off — then sealed so they stay off.
Done by ORE with EnduroShield's restoration polish · a small test area first · Klang Valley
Sound familiar?
Tap water leaves minerals behind every time it dries. Over months they bond to the glass, and ordinary cleaners stop touching them.
What can be doneSoap scum and body oils dry on in layers, until a clear screen looks frosted.
What can be doneThe screen works perfectly, but it looks tired — and people start pricing a new one.
What can be doneSend ORE a photo of the surface. The photo, or a site inspection where ORE may test a small area to show you, determines the appropriate work.
What can be doneBefore you spend
The state of the glass decides. We tell you which one it is.
ORE looks at the glass before confirming restoration — at the site inspection it may test a small area to show you — followed by coating where suitable.
The usual answer for a stained shower screenSend a photoClear glass can be assessed for EnduroShield coating to make ongoing cleaning easier.
New or nearly new glassSee EnduroShieldWhy restore
White, cloudy shower glass is usually not dirt. It is the surface of the glass itself, eaten into by hard water — and that is a job for restoration, not for a stronger cleaner.
At the site inspection, ORE may test a small area to show you the result, or explain on site, before confirming the restoration.
The restoration is performed in-house using the manufacturer’s restoration polish.
Discuss coating and regular cleaning after restoration.
OREOn site. Nothing is taken away.
replacing the glassMeasure, make, remove, refit.
OREAt the site inspection, ORE may test a small area or explain on site before confirming the work.
replacing the glassThen this is the right answer, and we will tell you so.
ORERestoration is for the surface, not for a crack.
replacing the glassReplace.
OREThe etched layer, mechanically, in stages.
cleaning it yourselfSoap film and fresh scale — not etching.
OREControlled, and tested on a small area first.
cleaning it yourselfAbrasive pads and blades scratch the glass permanently.
OREThe surface is coated so it stays easier.
cleaning it yourselfIt is back in a few weeks.
How it works
WhatsApp or Messenger
A paid visit — the glass decides the job
So you see the result first
EnduroShield restoration polish
EnduroShield coating, 3-year warranty
Step two
EnduroShield seals the surface so water and soap bead off instead of drying on.
Offices, shops & malls
One-off restoration, or regular glass cleaning and maintenance for your premises.
Talk to OREThe plain facts
Send a close-up photo of the stains. We tell you whether it looks like a restoration job, a coating job, or new glass.
WhatsApp usWhat customers say
“Loving the end result for my 8 yrs old shower glass, now it looks 80% new post the treatment, totally worth the money!”
Paul L.8-year-old shower glass · Facebook recommendation“They provided glass cleaning to remove water mark and applied the coating and how the glass is very clean and easy to maintain as water does not stuck much to the glass. dirt is easy to clean off with soft cloth”
Evan E. R.Water marks removed, then coated · Facebook recommendation“Had this coating for my shower screen for about 3 months now. Still very good and repel water. Minimizing water mark. But need to take care of it, cannot wipe with other chemical. The coating makes my bathroom look sparkling clean.”
Toh R.Shower screen, 3 months on · Facebook recommendationSend a photo, location and approximate size. A shower screen can be assessed from its photos. For an awning or skylight, ORE inspects on site — it may test a small area to show you, or explain on site — before confirming the work.
ORE does not offer scratch repair.
A typical shower screen of about 28 square feet takes 2–3 hours; restoration polishing takes longer.
That is the usual order — restore the glass first, then EnduroShield coating to keep it that way.
Selangor, Kuala Lumpur, Putrajaya (Klang Valley).
Yes, regular cleaning and maintenance for companies and malls can be arranged.
ORE performs the polishing restoration in-house rather than subcontracting it, using the EnduroShield manufacturer’s restoration polish.
Clear and dry the shower area. ORE masks nearby areas that could be affected. The existing 2–3 hour guide applies to a typical 28 sqft shower-screen application; additional restoration polishing takes longer and staff assess the scope.
The condition of the glass determines the work. ORE confirms the scope from your photos, or at the site inspection, where it may test a small area to show you.
